Texas Instruments 3000 - Manual (Page 93)

Using a Password
4. Press the Enter key again to install the new password, or press the Esc
key to abort the process and return to the Password Utility menu.
Removing a Password
Remove the current password as follows.
1. Highlight the Remove Password command on the Password Utility
menu and press the Enter key. The following menu displays:
2. Type the current password and press the Enter key. Your entry is
displayed as squares so that it cannot be seen by other people. If you
type the correct password, the message
Password check OK
displays on the next line. Press the Enter key to remove the current password, or
press the Esc key to abort the process and return to the Password Utility menu.
If you type the wrong password, the message
Incorrect Password
displays on the next line, and you are prompted to press any key to return to the
Password Utility menu. You can try to remove the password again, or you can
exit the Password Utility menu by selecting Exit.
5-12 Application Programs