4000000782_i450 instructions__pg28_en.pdf, W arning, C harness adjuster – The First Years VIA 1450 User Manual

Page 29

Advertising
background image

Section 7 - Installation and Use

5-

.

C Harness Adjuster

To loosen harness system

- The Harness Adjuster is located

at the Lower end of the Infant

Seat between the child’s feet.

Press the yellow center button

and pull the harness system

outward from the seat back

over the baby’s shoulder.

-

Harness System

W ARNING

Prevent injury. Always have child restrained

with harness system when child is in this Infant

Seat

6-

To Tighten Harness System

-

-

Lock Chest Clip and 5 Point

Buckle.

Pull Harness webbing out until

harness is snug over the child’s

shoulder.

28

Note: A snug strap should not

allow any slack. It lies in a

relatively straight line without

sagging. It does not press on

the child’s flesh or push the

child’s body into an unnatural

position.

Advertising