Toshiba B-SX6T Series - Manual (Page 29)

2. PRINTER SETUP ENGLISH VERSION EO1-33056
2.5 Loading the Ribbon
E2-15
2.5 Loading the Ribbon
(Cont.)
4. Fit the core of the Ribbon Supply Roll into the Ribbon Holders
(Supply side), aligning the notch of the ribbon core with the protrusion
of the Ribbon Holder.
5. Fit the core of the Ribbon Take-up Roll into the Ribbon Holders
(Take-up side), aligning the notch of the ribbon core with the
protrusion of the Ribbon Holder.
Ribbon Holder (Supply Side)
Ribbon Supply Roll
Ribbon Supply Roll
Notch
Ribbon Core
Ribbon Holder (Take-up Side)
Ribbon Take-up Roll
Fit the protrusion
into the notch.
Fit the protrusion
into the notch.