Toshiba B-SX6T Series - Manual (Page 43)

2. PRINTER SETUP ENGLISH VERSION EO1-33056
2.8 Setting an Operating Environment
E2-29
2.8.1 Parameter Setting
(Cont.)
(16) KANJI Code Selection
This parameter is to choose a KANJI code.
When “<2>PARAMETER SET” appears, press the
[PAUSE] key until
the following display appears.
Use the
[FEED] or [RESTART] key to select a desired option.
After selecting a Kanji code, press the
[PAUSE] key.
(17) EURO Code Selection
This parameter is to choose a Euro code (€).
When “<2>PARAMETER SET” appears, press the
[PAUSE] key until
the following display appears.
Use the
[FEED] or [RESTART] key to select a desired option.
After selecting a Euro code, press the
[PAUSE] key.
NOTE:
Kanji code selection is not supported
by the QM model as the Kanji ROMs
are not installed.
<2>PARAMETER SET
EURO CODE B0 NOTE:
Pressing the [FEED] or
[RESTART] key causes 1 byte
change in the Euro Code value.
[RESTART]
[FEED]
EURO CODE 20
EURO CODE 21
EURO CODE FE
EURO CODE FF
<2>PARAMETER SET
KANJI CODE TYPE1
KANJI CODE TYPE1
KANJI CODE TYPE2
[RESTART]
[FEED]
Windows code
Original code