Tandberg Data LTO-2 HH - Manual (Page 21)

Tandberg LTO HH Installation and User Manual 17
5 Software Installation
This chapter contains information for installing tape drives in the following operating system
environments:
• Windows 2000/2003/XP
• SCO Open Server
• SCO UnixWare
• Sun Solaris
• IBM AIX
• HP UX
• Linux
Please see www.tandbergdata.com SUPPORT, [Product], Compatibility for the most current backup
application software compatibility information.
5.1 Windows 2000/2003/XP
5.1.1 Windows Tape Driver
The Tandberg LTO HH requires an additional tape driver that is available from the Tandberg website
at
www.tandbergdata.com .
5.1.2 Windows Tape Driver Installation
1. Right-click on My Computer.
2. Select Manage, you should see the tape drive under “Other devices” with a “?”.
3. Select the device, right click and Properties.
4. Select the appropriate driver location.
5. Follow the instructions on the screen.
5.1.3 Windows Embedded Backup Application
The Backup application is included in the Windows Operating System.
Before running the application, make sure the tape driver for your Tandberg LTO HH tape drive is
properly installed. See Section 5.1.2.
To start the application:
1. Click on START.
2. Click on Programs.
3. Click on Accessories.
4. Click on System tools.
5. Select Backup.