2 specifications, 1 tape drive capacity and performance, 2 media specifications and compatibility – Tandberg Data LTO-2 HH User Manual
Page 7: 3 mechanical dimensions, 4 power requirements
Tandberg LTO HH Installation and User Manual
3
2 Specifications
2.1 Tape Drive Capacity and Performance
Tape Drive
Model
Tape Format
Capacity
1)
Sustained Transfer
Rate
1)
Interface Type
Tandberg
LTO-3 HH
Ultrium Gen. 3
Ultrium Gen. 2
Ultrium Gen. 1
400/800GB
200/400GB
100/200 GB
30/60 MByte/sec
24/48 MByte/sec
16/32 MByte/sec
Ultra160
Ultra160
Ultra160
Tandberg
LTO-2 HH
Ultrium Gen. 2
Ultrium Gen. 1
200/400 GB
100/200 GB
24/48 Mbyte/sec
16/32 MByte/sec
Ultra160
Ultra160
Tandberg
LTO-1 HH
Ultrium Gen. 1
100/200 GB
16/32 MByte/sec
Ultra 160
1) Capacity and transfer rate given in native/compressed (assuming 2:1 compression)
2.2 Media Specifications and Compatibility
Drive
Model
Media Name
Tape
Length
Capacity
(Native)
Ordering
no.
Tandberg
LTO-3 HH
LTO Ultrium Generation 3 (Native format)
LTO Ultrium Generation 2 (Read/Write compatible)
LTO Ultrium Generation 1 (Read compatible)
680 m
609 m
609 m
400 GByte
200 GByte
100 GByte
43 32 16
43 27 44
43 26 30
Tandberg
LTO-2 HH
LTO Ultrium Generation 2 (Native format)
LTO Ultrium Generation 1 (Read/Write compatible)
609 m
609 m
200 GByte
100 GByte
43 27 44
43 26 30
Tandberg
LTO-1 HH
LTO Ultrium Generation 1 (Native format)
609 m
100 GByte
43 26 30
2.3 Mechanical Dimensions
Standard drive mounting:
Fits in a 5.25-inch half-height (“slim-line”) enclosure for diskette, CD/DVD-rom or disk drive.
Standard mounting holes as for a half-height drive.
Dimensions (max.):
Height/width/depth: 41.3/146.0/214 mm (1.625/5.75/8.4 inch)
2.4 Power Requirements
Tandberg LTO-1, LTO-2, LTO-3 in external tabletop enclosure:
AC Input: 100 VAC / 0.6 A or 240 VAC / 0.3 A, 50-60 Hz
Tandberg LTO as standalone:
LTO-1/LTO-2
LTO-3
DC Input (typical operation) 5 VDC
2.1 A
0.8 A
DC Input (typical operation) 12 VDC
0.6 A
0.7 A