TOA Electronics M-9000 - Manual (Page 17)

17
9.1.5. Changing the output volume
Step 1. Press the Output channel selection key to turn on the Output channel ON/OFF indicator (red dot) for
the output channel for which the you want to change volume.
Channels to be selected will change each time the Output channel selection key is pressed.
Step 2. Adjust the volume using the output volume encoder.
Tip
Whether the changed volume is saved or not depends on the setting item
"Memory erasure or
storage" in the UTILITY setting on page 39 .
9.1.6. Output channel ON/OFF
Output channels alternate between ON and OFF with each depression of the Output channel ON/OFF key.
The channel is ON when the Output channel ON/OFF indicator (channel number) lights.