TOA Electronics M-9000 - Manual (Page 72)

72
20.4. Utility Settings
Setting Range
C-IN (control input), C-OUT (control output), POWEROFF, RS232C,
MODULE, PRIORITY, REMOTE (remote volume), EVENT (Event
activation at power-on), VERSION, MEMORY (memory initialization)
Setting Item
Function Selection
[When the function selection is set to C-IN]
Setting Range
01 – 4 (01 – 12 when the C-001T is used, excluding the control
inputs set for Event trigger)
NONE, VOLUP (volume up), VOLDOWN (volume down), MUTE,
POWER, EMG-MUTE (Cut-off by Emergency control)
ON, OFF
01 – 04 (01 – 12 when the C-001T is used)
Setting Item
Control Input Number
Control Input Function Selection
Interlock Control Output
(When the control input function is set to
VOLUP or VOLDWN only)
Interlock Control Output
(When the interlock control output is ON)
Setting Range
01 – 04 (01 – 12 when the C-001T is used, excluding the control
outputs set for Event trigger)
NONE, POWER
Setting Item
Control Output Number
Control Output Function Selection
[When the function selection is set to C-OUT]
Setting Range
DEL, SAVE
Setting Item
Memory Storage at Power-Off
[When the function selection is set to POWEROFF]
Setting Range
115.2k, 57.6k, 38.4k, 19.2k, 9.6k
Setting Item
Communication Speed (bps)
[When the function selection is set to RS232C]
Setting Range
1 – 8
OTHERS, B-01, B-11, B-21, B-41, E-03, E-04, E-05, E-06, E-07,
L-01, L-11, L-41, M-01, M-03, M-11, M-21, M-41, M-51, M-61, S-01,
S-02, S-04, T-01, T-02, T-12, U-01, U-03, U-11, U-12, U-13, U-14,
U-21, U-43, U-61, V-01
Setting Item
Slot Number
Module Classification
[When the function selection is set to MODULE]
Setting Range
FIFO, LIFO, MIX
Setting Item
Priority
[When the function selection is set to PRIORITY]