TOA Electronics M-9000 - Manual (Page 45)

45
Step 8. Return to the input gain setting screen and press the Right
shift key.
The output ON/OFF and gain setting screen is displayed.
Step 9. Press the Right shift key so that the gain value flashes, then
adjust the gain with the Output volume encoder.
In this event, pressing the Output channel selection key
permits the output channel to be selected. When multiple
output channels must be changed, select all of such output
channels and adjust their output volume.
Step 10. Return to the input gain setting screen and press the
ESC/BACK key.
The display reverts to the Event number selection screen.
Step 11. Using the Parameter setting knob, select the Event number
to be set next, then set the selected Event to ON by pressing
the Input channel ON/OFF key.
* Multiple Events can be set to ON. Make their adjustments
one by one.
Step 12. Repeat Steps 5 – 9 to adjust each parameter.
Step 13. After all adjustments are completed, press the Memory key
to exit the adjustment mode.
The display reverts to normal operation state.
8
10
I N 1 – I N 1 O N + 1 0 .
9
O U T 1 O U T 1 O N + 1 0 0 .
O U T 1 O U T 1 O N + 1 0 0 .
O U T 1 O U T 1 O N + 1 0 0 .
O U T 1 O U T 1 O N + 5 0 .
ESC/BACK
12
ON/OFF
ENTER
13 MEMORY
E V E N T 0 1 R O U T E O N
E V E N T 0 2 R O U T E O F F
E V E N T 0 2 R O U T E O N
PARAMETER
11
I N 2 – I N 2 O N + 1 0 .
OUTPUT VOLUME