Topcom Skylanr@cer 500 - Manual (Page 10)

II) Point to Multipoint: The Wireless Bridge can communicate with any Wireless Bridge available in
the same channel.
Figure B Building To Building environment
Note: After you made all the advanced settings as required, select File > Download Changes. When “Do you want
to Download Configuration?” message appears, click Yes. When download is finished, you’ll see “Download confi-
guration done” message on the status bar.
Encryption Settings
If you are going to enable WEP, select whether to use 64-bit WEP or 128-bit WEP as the encryption
algorithm. Then enter the WEP keys in Key 1-4 fields. WEP keys must be comprised of the hexadeci-
mal characters (0-9, A-F, and a-f) and must contain 10 characters for 64-bit WEP Keys or 26 charac-
ters for 128-bit WEP keys.
SkyLanR @ cer 500
10