Topcom Skylanr@cer 500 - Manual (Page 11)

SkyLanR @ cer 500
11
ENGLISH
In the Default Key field, select one of the four keys to encrypt the data before being transmitted. All
stations, including this Access Point, always transmit data encrypted using the Default Key. The key
number (1,2,3,4) is also transmitted. The receiving station will use the key number to determine which
key to use for decryption. If the key value does not match with the transmitting station, the decryp-
tion will fail. To ensure successful decryption, have your Wireless Stations set identical key tables.
Note: All Wireless Stations must use the same encryption algorithm and the same Key value (same key position in its
key table) as the Access Point.
After setup, click the Set button to enable the settings.
Authorised MAC Address
This panel allows you to view or edit the Authorised MAC Address list. You can determine which
client is authorised to associate with this Access Point by adding its MAC address to this Authorised
MAC Address list. If left to blank, all the Wireless Stations are capable of connecting to the network
via this Access Point.
The button of Add, Modify, Delete and Clear are used to edit the list. For your convenience, you
can pre-define the MAC addresses in a text file (*.txt) and click the Load File button to load these
addresses from this text file. To enable the settings, click the Set button. Clicking Set will prompt you
with the message: “Do you want to Download these Mac Addresses?”.
Click Yes to start the download.