Topcom Skylanr@cer 500 - Manual (Page 6)

3. Type the New IP Address which is suitable for the communication between the Access Point and
the PC which executes the Access Point Configuration Utility. Then click the OK button.
4. A warning message appears that “You must use ‘Download Changes’ to change your IP address
permanently”, just click OK.
5. You will return to the Connect to Access Point window. In the Available Access Points column,
double-click the target Access Point whose IP address you just modified. In the Community field,
type the Administrator community name: admin. Then click the Connect button.
6. After connection is established, select File > Download Changes. When “Do you want to
Download Configuration? ”message appears, click Yes . When download is finished, you’ll see
“Download configuration done” message on the status bar. Now you have assigned a permanent
IP address to this Access Point.
Connecting to the Access Point
1. Launch the Access Point Configuration Utility.
2. Within the utility appears the Connect to Access Point window. In the Available Access Points
column, double-click the target Access Point which you want to configure.
3. In the Community field, type the Administrator community name admin and then click the
Connect button.
Note: If you are connecting to the Access Point using User Community name public, only read-only access is allo-
wed. Some of the menu options are not available. Download Changes are not allowed either.
SkyLanR @ cer 500
6