TMIO PS302SS00 - Manual (Page 31)

From the Main Screen
• Select
My Oven drop down
• Select Oven Service
• Select Software Update
Note: Oven must be connected to Internet for Software updates
• System will automatically download any updates and reboot the system
From the Main Screen
• Select
My Oven drop down
• Select Oven Service
• Select Oven Reset
• The oven will automatically re-boot itself
• In the event the system does not re-boot correctly, remove louvered
refrigeration panel and press reset switch located on the right hand side
Enable Demo Mode
The Demo Mode is only used when demonstrating the oven’s features in a store, and should never be used in
the home. When in Demo Mode, the heating elements or the refrigeration system will not activate.
From the Main Screen
• Select
My Oven drop down
• Select Oven Service
• Select Enable or Disable Demo Mode
• Oven operates in normal condition
Note: In Demo Mode a demo icon appears in the upper right corner of
the Main Screen. This icon will not appear when Demo Mode is disabled.
In Demo Mode:
If
Lock Controls has been activated,
the Oven ID number found on the Oven
Diagnostics screen will be required to
unlock controls.
OVEN SERVICE
Software Update
The Connect Io™ Intelligent Oven™ will continue to offer the most advanced features for our customers.
Periodic updates are made by TMIO for ovens connected to the Internet.
Oven Reset
This is a re-boot of the system.
Circuit Breaker
A 15 Amp push button circuit breaker is found next to the reset switch behind the louvered refrigeration panel.
This is used if the 110V receptacle (See Features of Your Oven: Parts Identification - page 3) is not working due
to excessive amperage.
28