Tektronix 070-8811-08 - Manual (Page 76)

Reference
764 Digital Audio Monitor User Manual 61
Service Submenu
Use the Service submenu (Table 14) to select patterns for use in
adjusting the display; find the version of software installed in the
instrument and the instrument’s firmware identification number; and
superimpose a numeric readout of signal levels on the Session
display. Refer to the 764 service manual for more information.
Table 14: Service submenu
Item Choices Factory setting
БББББББ
ББББББ Б
БББББББ
Adjustment БББББББ
ББББББ Б
БББББББ
MONITOR CROSS-
HATCH ББББББББ
БББББББ Б
ББББББББ
(not applicable)
БББББББ
ББББББ Б
БББББББ
Information
БББББББ
ББББББ Б
БББББББ
SOFTWARE VERSION
IDENTIFICATION NUM.
ББББББББ
БББББББ Б
ББББББББ
(not applicable)
БББББББ
БББББББ
Numeric Level Readout
БББББББ
БББББББ
OFF; ON
ББББББББ
ББББББББ
OFF
Adjustment. Once you choose this item, you can cycle through the
four available test patterns by repeatedly pressing the top soft button.
Patterns are used in adjusting the display during manufacture.
Information. Press the appropriate soft button to access the corre-
sponding information.
Numeric Level Readout. This readout is intended for use in manufac-
ture only; it obscures a large part of the Session display.