Tektronix 070-8811-08 - Manual (Page 96)

Appendix A: Specifications
764 Digital Audio Monitor User Manual 81
Table 29: Certifications and compliances (Cont.)
Australia/New
Zealand Declaration
of Conformity –
EMC Complies with EMC provision of Radiocommunications Act per
the following standard(s):
AN/NZS 2064.1/2 Industrial, Scientific, and
Medical Equipment: 1992
EC Declaration of
Conformity – Low
Voltage Compliance was demonstrated to the following specification as
listed in the Official Journal of the European Communities:
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC:
EN 61010-1:1993
Safety requirements for electrical equipment for
measurement, control, and laboratory use
Approvals UL3111-1 – Standard for electrical measuring and test equipment
CAN/CSA C22.2 No. 1010.1 – Safety requirements for electrical
equipment for measurement, control and laboratory use
Installation Category
Descriptions Terminals on this product may have different installation category
designations. The installation categories are:
CAT III Distribution-level mains (usually permanently
connected). Equipment at this level is typically in a fixed
industrial location
CAT II Local-level mains (wall sockets). Equipment at this level
includes appliances, portable tools, and similar products.
Equipment is usually cord-connected
CAT I Secondary (signal level) or battery operated circuits of
electronic equipment