The Eltron Company PRIVILEGE P600 - Manual (Page 60)

Media Loading
Orientation
Printers with Magnetic Encoders can have their
read/write heads positioned either above or
below the path traveled by the cards. All
configurations must have the magnetic stripes
placed closest to the rear of the printer. How-
ever, check the configuration to determine
whether the magnetic stripe should face up or
face down. Improper hopper loads produce
read errors.
Ensuring Data
Reliability
A read verify pass is always performed on all
encoded cards to guarantee data integrity.
Either Software (WindCard™) or command
programming controls the Write and Read-
verify data processes.
52
980179-001 Rev. A
Magnetic Card Stripe Encoder
Figure 3-1
Magnetic Stripe
Position
Position Stripe
Toward Back
(and typically facing
down, but check
configuration)
Position Stripe
Toward Back
(and typically facing
down, but check
configuration)