Tyco Electronics LD9000 Series - Manual (Page 31)

Convert MSR from keyboard emulation to HID
1 To convert from Keyboard Emulation mode to HID mode
1.1 Double-click on the “MSR Change Mode” icon on the desktop.
The following will appear:
1.2 The dim box will indicate the current setting. Click the “HID Mode” to
switch to HID mode.
1.3 Click “Quit” to close the window.
Rear Facing Customer Display
1. Insert your Elo TouchTools CD.
2. On the CD, browse to Touch Monitor Peripherals\Rear Facing Customer
Display\Drivers\USB Drivers. Click on the folder that has the name of your
operating system for the necessary drivers.
3. Once in this folder, open up the zip file and open the install text file for further driver
installation instructions.
* Note: If your software requires OPOS Drivers, it is available in the following location:
Touch Monitor Peripherals\Rear Facing Customer Display\Drivers\OPOS Drivers.
Test Applications:
1. Insert your Elo TouchTools CD.
2. On the CD, browse to Touch Monitor Peripherals\Rear Facing Customer
Display\Testing\USB.
3. Open up the text file named USB Test and follow the instructions. This testing
procedure assumes you have already installed the necessary USB drivers.
2-26 Elo Touchmonitor User Guide