Toshiba 3006GAL User Manual
Page 102
360050398
Toshiba Corporation Digital Media Network Company
Page 102 of 157
© 2005, Copyright TOSHIBA Corporation All Rights Reserved
10.8.41 SECURITY DISABLE PASSWORD (F6h)
COMMAND CODE
1 1 1 1 0 1 1 0
REGISTER
REGISTER SETTING
NORMAL COMPLETION
DR
DRIVE No.
no change
CY
no
change
HD
no
change
SN
no
change
SC
no
change
FT
no
change
This command can be executed only when the drive is in unlocked mode. When the drive is in locked mode,
the drive rejects the command with an Aborted command error.
The SECURITY DISABLE PASSWORD command requests a transfer of a single sector of data from the host
including the information specified in the following table. Then the drive checks the transferred password. If
the user password or the Master password match the given password, the drive disables the lock function.
This command does not change the Master password which may be reactivated later by setting a user
password.
Security Disable Information
Word Content
0 Control
word
Bit
15-1
Reserved
Bit 0
Identifier 0=compare user password
1=compare master password
1-16
Password (32 bytes)
17-255 Reserved
10.8.42 SMART Function Set (B0h)
This command has a number of separate functions which can be selected via the Feature Register when the
command is issued. The subcommands and their respective codes are listed below.
Subcommand
Code
SMART READ ATTRIBUTE VALUES
D0h
SMART READ ATTRIBUTE THRESHOLDS
D1h
SMART
ENABLE/DISABLE
AUTOSAVE D2h
SMART SAVE ATTRIBUTE VALUES
D3h
SMART EXECUTE OFF-LINE IMMIDIATE
D4h
SMART READ LOG SECTOR
D5h
SMART WRITE LOG SECTOR
D6h
SMART ENABLE OPERATIONS
D8h
SMART
DISABLE
OPERATIONS D9h
SMART
RETURN
STATUS
DAh
SMART ENABLE/DISABLE AUTOMATIC OFF-LINE
DBh