7 web interface – TANDBERG F1 D13642.01 User Manual

Page 117

Advertising
background image

5 Peripheral Equipment

113

5.7 Web Interface


It is possible to access and maintain the system remotely via a local area network (LAN)
using a standard Web-browser. Connect your system to a LAN with a Network cable.

How to configure your system for web interface:

1. Open Administrator Settings and choose Network\LAN Settings
2. Specify IP-assignment DHCP or Static. If DHCP is selected, no other settings are

needed. If Static is selected, IP-address, IP-subnet mask and Gateway must be
specified.

3. Start your Web-browser. In the address field type the IP-address of the system. Enter

the password and the Web-page of the system will be shown. The default password
is TANDBERG.

4. Restart the system. Choose Restart from the Control Panel.


Example:

IP-assignment: Static
IP-address: 196.9.200.129
IP-subnet mask: 255.255.255.0
Gateway: 196.9.200.21


See chapter

4.8.2 LAN Settings

for further information.

Advertising