TANDBERG F1 D13642.01 - Manual (Page 76)

TANDBERG 1500 MXP
72
Manual
When starting a presentation, a dialog box appears asking if you want to start
Duo Video. In this way you can choose manually if you want to use Duo Video
or not.
4.3.2 H.239
H.239 supports transmission of two video streams. It combines elements of Duo Video and
People+Content. If H.239 is disabled you will still be able to start TANDBERG Duo Video.
Enabled: Enables H.239
Disabled: Disables H.239
4.3.3 Call Video Source
The Call Video Source is the default video source you would like to use in a call. If you use
Main Camera as Call Video Source, the system will start with Main Camera every time you
make a call, regardless of what the previous video source was.
Example: What is the advantage of setting Call Video Source to Main Camera?
When you are not in a call, you can work with the screen as a normal PC screen. When
you make a video call, the system will automatically change to Main Camera. When you
receive a call, the system will also automatically change to Main Camera, preventing
that the caller will see your PC image.
You can change Call Video Source to Main Camera, PC or Current. Choosing Current will
result in the last used video source.
4.3.4 Presentation Source
The Presentation Source is connected to the Presentation button on the remote. Pressing the
Presentation button will put the Presentation Source on display. Presentation Source is PC by
default. You can change the Presentation Source to any video source and none. Choosing
none results in opening the Presentation menu when pressing the Presentation key.