4 pc soft presenter and vnc – TANDBERG F1 D13642.01 User Manual

Page 48

Advertising
background image

TANDBERG 1500 MXP

44

3.11.4 PC Soft Presenter and VNC

(Optional feature)

PC SoftPresenter is used to display PC images on your system without using a VGA cable
(PC Presenter). The system and your PC must be connected to the same LAN. In addition,
VNC (Virtual Network Computing) server software must be installed on the PC. Free software
can be downloaded from

http://www.realvnc.com

. Install the software by running the

downloaded file.

How to configure the VNC Server software:

1. Select the following to setup VNC; Windows-Start\All Programs\Highlight

RealVNC\Hightlight VNC Server\Show User Properties

2. Select Accept Socket Connections.
3. Select Auto for Display Number. Display Number in the system must then have the

value 0.

4. Enter a password in the Password-field. This must correspond with the VNC Settings

on your system.



How to show PC using the PC Soft Presenter and VNC:

1. Start the VNC software on your PC.
2. To use VNC, you must configure VNC Settings. Open VNC Settings in the

Presentation Settings menu in Administrator Settings.

3. Fill in the IP address of your PC, Display Number and Password. See chapter

4.3.9

VNC Settings

for more information.

4. Press Save.
5. When you now choose VNC as video source in the Presentation menu, you will see

your PC using VNC. VNC settings will go back to default when the system goes to
standby.

Advertising