Tesla TI2000GPU-24 - Manual (Page 10)

2-4
7) Replace the
white clip back into
the fuse clip. Take
care not to damage
the tabs. 8) Completely insert
white clip in to fuse
clip (GENTLY) until
it snaps into place. 9) Insert fuse clip
back into fuse housing
EVENLY on both sides.
DO NOT FORCE, if fuse
clip does not go in easy,
it means fuses are mis-
aligned, realign fuses and
insert again. 10) Snap fuse clip
back into the housing
(GENTLY).
DOUBLE
CHECK VOLTAGE
WINDOW PRIOR
TO PLUGGING UNIT
INTO AC POWER
5) Completely remove
the white clip from the
fuse clip. 6) Ensure that the
proper voltage is selected
on the white clip. (See
Enlargement 2 & 3)
1) Grab both tabs
on left and right side
of the fuse clip. Press
tabs inward and pull
fuse clip out of housing
GENTLY. 2) Completely pull
fuse clip from housing,
being careful not to
drop the fuses from
the fuse clip. 3) Note: The fuses
are not fastened into
the fuse clip, they are
lose. Take care to ensure
fuses are not dropped or
lost. 4) GENTLY pull the
white clip from the
fuse clip, taking care
not to bend any of
the tabs. (See
enlargement 1)
Fuse Setting Procedures
for Switching Voltages or Changing Blown Fuses
ENLARGEMENT 1
TABS
ENLARGEMENT 2 120 VAC SETTING
ENLARGEMENT 3 240 VAC SETTING