Tesla TI2000GPU-24 - Manual (Page 19)

4-1
SECTION II. OPERATING PROCEDURES
4-4. OPERATING PROCEDURES
This section deals with normal procedures, and includes all steps
necessary to ensure safe and efficient operation of the TI2000GPU-24
(Turbo Start 3000). As experience is gained with the Turbo Start
3000, the user will be able to maximize the unit’s unique capabili-
ties to enhance the flexibility of aircraft maintenance and support
operations.
NOTE
When the TURBO START 2000 is not in use, it should always remain
plugged into a suitable AC power source to insure operational readi-
ness at all times. REMEMBER,when the AC line cord is plugged in, the
unit must be placed in the horizontal position to allow the cooling
fan to operate properly!
4-5. BEFORE OPERATION CHECK
1. CHECK FUSE WINDOW FOR PROPER SETTING (120/240 ) BEFORE PLUGGING
UNIT INTO THE AC POWER SOURCE TO BE USED . REMEMBER,when the AC line
cord is plugged in, the unit must be placed in the horizontal posi-
tion to allow the cooling fan to operate properly!
NOTE:
A full charge is indicated by Either a steady lighted green bar or a
blinking green bar at the bottom of the bar graph column.The fan will
also exhibit ratcheting but will not come on when the unit is fully
charged.
2. CHECK UNIT FOR EVIDENCE OF DAMAGE - Check for dents, punctures,
case distortion or misalignment, cracked or loose connectors, and
STATUS