Tally Genicom Matrix Printer - Manual (Page 27)

7265 Programmer’s Manual 23
Copyright © 2004 TallyGenicom Chapter 2 ANSI
Vertical Movement
Commands Description
LF LINE FEED
Advances the paper one line according to the spacing currently in effect.
Dec 10 Hex 0A
VT VERTICAL TAB
Advances paper to the next vertical tab setting. If the current print position is at or
beyond the last tab setting, the paper advances to the top of form. If no tabs are set,
then VT is processed according to the status of emulation option strap 14.
Dec 11 Hex 0B
FF FORM FEED
Advances the paper to the top margin on the next form.
Dec 12 Hex 0C
ESC D
(IND)
INDEX
Advances the paper to the next line. The current column is not changed, regardless
of the status of auto CR on LF.
Dec 132 Hex 84
ESC E
(NEL)
NEXT LINE
The next line character advances the paper to the next line. The current column is
reset to the left margin. Auto CR on LF has no effect.
Dec 133 Hex 85
ESC M
(RI)
REVERSE INDEX
Moves the paper back one line.
Dec 141 Hex 8D