TANDBERG Maestro MXP - Manual (Page 19)

Installation
19
control which operates pan, tilt, focus, zoom and backlight compensation. Up to fifteen camera
positions can be pre-stored using Camera Presets.
TANDBERG WAVE II Camera
The TANDBERG Wave II Camera includes a high quality color camera with a fast
pan/tilt/zoom/focus action. The main camera is controlled by the system’s infrared remote control
and operates pan/tilt, focus and zoom. Up to fifteen camera positions can be pre-stored using
Camera Presets.
A locking mechanism fixates the camera on top of the product. To release the locking mechanism
and remove the camera push the grey button on the rear end of the camera stand
Internal LCD Display
The system has a built-in 5inch LCD designed to optimize system configuration and give the user
access to menus and test video signals without attaching or powering an external display device.
The LCD gives full control of all system settings and status. Below the LCD there are three
system indicators, one red light indicating that the system is powered, one yellow light indicate
that a call is active, and one green light indicate that the table microphones are muted.
External display
The TANDBERG Maestro is designed to give unlimited flexibility on the choice of display
technologies and solutions to display video, and is an ideal solution for large meeting rooms
which already are equipped with e.g. front projector and screen. For transferring video signal to
one or more external display devices the Codec has the following video outputs:
- DVI-I analog or digital interface
- XGA
- MiniDin, S-video