TANDBERG Maestro MXP - Manual (Page 244)

TANDBERG Maestro MXP
244
6 Video Outputs:
ƒ 2 S-Video outputs, Mini-DIN connectors.
ƒ 2 composite video outputs, RCA connectors.
ƒ 2 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) output, analog
or digital.
The first Mini-DIN connector and the first RCA connector provide main video (incoming/outgoing
video and menus). The two other connectors provide selfview/snapshot/Duo Video. The S-Video
outputs are used by default by the monitors. The outputs are always active. The format of the
output will be either PAL or NTSC depending on your country’s standard video format.
Levels:
ƒ Composite: 1 Vpp, 75 ohm
ƒ S-Video
(Y/C):
ƒ Y: 1 Vpp, 75 ohm
ƒ C (PAL): 0.3 Vpp, 75 ohm
ƒ C (NTSC): 0.28 Vpp, 75 ohm
VGA formats supported on 'DVI-I out':
SVGA (800x600) 75Hz
XGA (1024x768) 60Hz
WXGA (1280x768) 60Hz
HD720p (1280x720) 50,60 Hz
DVI and specifications:
DVI stands for Digital Video Interface, and is a form of video interface technology made to
maximize the quality of flat panel LCD monitors and high-end video graphics cards.
The TANDBERG codec contains a DVI-I plug that can transmit either digital DVI signals or
standard analog VGA signals, depending on what type of monitor is connected.
DVI Specifications
TANDBERG DVI-I follows the VESA Monitor Timing Standard v1.08, also knows as Display
Monitor Timing (DMT).
The resolution used when showing a PAL image like the Precision HD Camera is:
ƒ 1280x720p @ 75Hz.
The resolution used when showing a NTSC image like the Precision HD Camera is:
ƒ 1280x720p @ 60Hz.
The resolution used when showing a PAL image like the WAVE II is:
ƒ 800x600 @ 75Hz.
The resolution used when showing a NTSC image like the WAVE II is:
ƒ 1024x768 @ 60Hz.