Toshiba W-808 - Manual (Page 17)

17
PREP
ARA
TION
8
Press ENTER to start the “AUTO” clock
set feature.
After a while, the VCR automatically updates
the clock using the data broadcast by the
local TV stations.
The following screen will appear on TV
depending on the broadcast at your location.
9 Select the options using FF or REW .
Change the data using PLAY/x2 or
STOP .
1) Set “SUMMER TIME (Daylight-
Saving Time)”.
IN, daylight-saving time begins on the first
Sunday in April. Because the clock
automatically changes from 2:00 AM to
3:00 AM (forward one hour), remember
that any part of a scheduled Timer
Recording that falls between these two
times will not be recorded.
OUT, daylight-saving time ends on the last
Sunday in October. The VCR clock
automatically changes from 2:00 AM to
1:00 AM (back one hour). Therefore, it can
affect your recording length if one is set
for this time.
2) Set “Time Zone”.
If you select “AUTO” for your time zone,
the VCR sets the clock using the first
Coordinated Universal Time information it
finds. If the time is not correct, select
another time zone or use the “MANU”
option.
3) Set “CH”.
If you don't know the clock data channel,
select “AUTO”. The VCR will scan
automatically to tune the channel carrying
the clock data.
If AUTO CLOCK SET is unsuccessful, set the
time and date through the “MANU” clock set
menu selection.
10 Press PROG. .
Now the clock starts.
11
Press PROG. to exit.
PROG ENTER
AM
SUMME ME R T I
5 7 9 : 1 0 00 SA 1 ’ /
n E Z O H C T I ME
T E DA R A E Y T I ME
C L OCK S E T
E D: n
AUTO AUTO AUTO AUTO EAS I n T ER n 2
SET UP PRESET PROGRAM
PROG
C L OCK S
CH MEMOR Y
CAB L E B
GU I DE
H C
OX / D S S
E T
ENTER E D: n
SET UP PRESET PROGRAM
Setting the Clock
Example: To set the clock to 2:30 p.m. on
August 25 (summer time) 2000.
1
Press PROG. .
The MENU screen appears on the TV.
2
Select “PRESET” using FF or REW , and
press ENTER .
3
Press ENTER to select “CLOCK SET”.
4
Select “AUTO” or “MANU” using PLAY/
x2 or STOP .
AUTO: The VCR automatically sets or
adjusts the clock.
If you select “AUTO” mode, proceed to step
8 .
MANU: You can set the clock manually.
If you select “MANU” mode, select “SUMMER
TIME” using
FF. Set to “IN” or “OUT” for the
summer (daylight saving) time using PLAY/x2
or STOP. (For “IN” and “OUT” selections, see
the description in step 9 .)
5
Move to the next using FF .
(To move back, press REW.)
6
Vary the digits to set the hour.
PLAY/x2: To increase.
STOP:
To decrease.
7
Repeat steps 5 and 6 to set the minutes,
month, day, and the year (by the last two
digits).
Proceed to step 10 to start the clock.
PROG
AM
SUMME ME R T I
0 0 12 : T OU 1 0 00 SA 1 ’ /
T E DA AR Y E T I ME
C L OCK S E T
E D: n
SET UP PRESET PROGRAM
MA U n