Toshiba W-808 - Manual (Page 22)

22
S-VHS Playback
1 Load a cassette recorded in S-VHS.
The “ ” indicator will light on the
VCR display.
Power is turned on.
If the cassette has no safety tab,
playback starts automatically.
2
Press PLAY/x2 to start playback.
3
To stop playback, press STOP .
Rewinding / Fast-forwarding
Press REW or FF in the stop mode.
Note
Tapes recorded in S-VHS mode can not be played back successfully on
normal VHS VCRs.
Playback (continued)
POWER
VCR S P
DT
POWER
A.SELECT REMAIN
COUNTER
COUNT
RESET
POWER CH DOWN CH UP
DNR
2 1 3
5 4 6
8 7 9
0 100
VCR Plus+
REW FF
PLAY/x2
STOP
ENTER
FF
STOP
REW
PLAY/x2
S-VHS ET Playback
1
Load a cassette recorded in S-VHS
ET.
Power is turned on.
If the cassette has no safety tab,
playback starts automatically.
2 Press PLAY/x2 to start playback.
3
To stop playback, press STOP .
Rewinding / Fast-forwarding
Press REW or FF in the stop mode.
Note
S-VHS ET recordings can only be played back on an S-VHS VCR or a VHS
VCR equipped with SQPB (S-VHS QUASI PLAYBACK) function. However,
there may be cases where S-VHS ET playback is not possible on a particular
VCR.
POWER
VCR S P
DT
POWER