Toshiba W-808 - Manual (Page 29)

29
RECORDING
To Record in S-VHS ET Mode
This VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
1 Load a cassette with the safety tab attached.
2
Press TV/VCR so that the “VCR”
indicator appears in the VCR display.
3
Select a channel to record with
CHANNEL on the VCR, or CH/TRK
or number buttons on the remote
control.
If you see “L1” or “L2” in the VCR display, press I.SELECT so that the
channel number appears.
• If you record cable channels via the cable box, make the output
channel number of the cable box or “L1” appear, depending on your
connection. (See pages 11 – 13.)
4
Press SP/SLP to select the
recording tape speed.
SP: Suitable for general recording with
better picture and sound quality.
SLP: Suitable for tripling recording time, but with less picture and
sound quality than using the SP tape speed.
5
Press PROG. to display the MENU screen.
6
Select “SET UP” using FF or REW , and press ENTER .
7 Press STOP repeatedly to go to screen 2 of SET UP page to
select “S-VHS ET”, and set to “ON” using REW or FF .
“S-ET” indicator will appear on VCR display when “ON” is selected.
8 Press REC on the VCR, or
simultaneously press both REC on
the remote control.
The S-VHS ET recording mode will be
automatically selected.
9
Press STOP to stop recording.
Note
S-VHS ET does not work with S-VHS tapes.
A.SELECT REMAIN
COUNTER
COUNT
RESET
POWER CH DOWN CH UP
DNR
2 1 3
5 4 6
8 7 9
0 100
ENTER
VCR Plus+
REW FF
PLAY/x2
STOP
2
3
I.SELECT
5
6
4
VCR SLP
CH
POWER
VCR SLP
POWER
VCR SLP
CH
POWER
VCR SLP
REC
CH
POWER
REC TIMER