Tektronix MTG100 - Manual (Page 187)

Appendix B: Using MTG Comm + for File Transfers
BĆ14
MTG100 & MTG300 MPEG Generator User Manual
Table BĆ4: User Check dialog box parameters
Parameter Description
File Displays the directory path and file name of the stream file you selected to
transfer to the MPEG generator.
File Size Displays the file size of the stream file you selected to transfer to the
MPEG generator.
Standard Sets the format to be used by the MPEG generator to playback the stream
file you are transferring to the generator. You must set this parameter to
correctly match the format of the selected transport stream file or else the
MPEG generator will not be able to correctly playback the file. Refer to the
Caution note on page BĆ8.
For a Non TS, SĆTMCC, or MĆTMCC file, the standard is determined
automatically by the application depending on the file content. For a
transport stream file (MPEG2, ATSC, DVB, or ARIB), the standard is set
to the previous setting as a default.
If the Non TS standard is selected, the Psync button becomes valid.
When you press this button, the Set Psync dialog box appears. Use the
dialog box to enable the PSYNC and DVALID signal for data output. Refer
to Set Psync Dialog Box on page BĆ16 for detailed information about the
dialog box parameters.
Refer to Automatic Determination of Standard on page BĆ23 about how
the MTG Comm+ application determines the standard of the selected
stream file.
Packet Size Sets the packet size of the selected transport stream. The MTG Comm +
application automatically sets this parameter to match the selected
transport stream file. The application counts the number of bytes between
the 0x47 (sync byte) values in the stream.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com