Tektronix MTG100 - Manual (Page 60)

MTG100 & MTG300 MPEG Generator User Manual
3Ć1
Reference
The Reference section is divided into the following subsections:
H Bezel Menu describes how the bezel menu functions vary with the current
mode of the instrument.
H Pull-down Menus describes the function of each selection available in the
pull-down menus.
H Hierarchy Display describes the icons used by the MPEG generator to
represent transport stream elements, and lists the Bezel menu functions
available with each icon type.
H Replacing and Inserting Section Data (MTG300 Only) provides instructions
and procedures on how to replace and insert section data.
H Adding Jitter to PCRs (MTG300 Only) provides instructions and procedures
on how to add jitter to PCRs.
H Preset File provides information about the preset file and procedures on how
to save and load a preset file.
H File Operations provides procedures on how to create a new folder, copy a
file, delete a file or folder, and rename a file name or folder name.
Bezel Menu
The Bezel menu is the command menu that appears on the right side of the
screen next to the bezel buttons (see Figure 2-3 on page 2-7). Press the bezel
button associated with the displayed menu selection to make selections in the
Bezel menu. Which commands are displayed in the Bezel menu depends on the
following factors:
H The model of the instrument. The MTG300 MPEG Generator has more
functions available than the MTG100 MPEG Generator.
H When the Icon cursor is enabled, the Bezel menu functions change to match
the selected transport stream icon. When the Pull-down menus are enabled,
the Bezel menu functions change to interact with the selections you make in
the Pull-down menus.
H The current output loop mode. The Bezel menu selections change to match
which output loop mode is selected. Refer to Output Loop Modes on
page 2-15 for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com