Thomas & Betts 9395 - Manual (Page 8)

UPS 225 - 275 kVA
User’s and Installation Guide
1027212
Revision B

1.3 Basic system configurations
The following basic UPS system configurations are possible:
Single module UPS and one to four battery cabinets
Single module UPS and a standalone battery system
The UPS system configuration can be enhanced by adding optional accessories such as a
Remote Emergency Power-off (REPO) control, or X-Slot® communication cards.
1.4 Using this manual
This manual describes how to install and operate the Powerware 9395 UPS (225–275 kVA)
cabinet. Read and understand the procedures described in this manual to ensure trouble-free
installation and operation. In particular, be thoroughly familiar with the REPO procedure (see
paragraph 5.3.10 on page 62).
The information in this manual is divided into sections and chapters. The system, options, and
accessories being installed dictate which parts of this manual should be read. At a minimum,
Chapters 1 through 3 and Chapter 5 should be examined.
Read through each procedure before beginning the procedure. Perform only those procedures
that apply to the UPS system being installed or operated.
1.5 Conventions used in this manual
This manual uses these type conventions:
Bold type highlights important concepts in discussions, key terms in procedures, and menu
options, or represents a command or option that you type or enter at a prompt.
Italic type highlights notes and new terms where they are defined.
Screen type represents information that appears on the screen or LCD.
Icon Description
Information notes call attention to important features or instructions.
[Keys] Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].
In this manual, the term UPS refers only to the UPS cabinet and its internal elements.
The term UPS system refers to the entire power protection system – the UPS cabinet, the
battery cabinet, and options or accessories installed.
•
•
•
•
•