Tannoy ACTIVE STUDIO MONITORS - Manual (Page 41)

41
iDP SOFT
™
(cont.)
Phase
Range: 0-180°
To time-compensate if the Sub cannot be placed according to the ITU 775 recommendations. There are individual Phase
settings for each of the Bass Management Cross-over frequencies. Once set, these are stored as Global settings.
Polarity
Range: 0 or 180 deg.
Mark to activate.
Calibrated Level
Level calibration of the selected monitor.
Relative Level
Preset volume for the selected monitor relative to the
calibrated and global volume.
LFE Gain
Range: 0 to 14dB
With this parameter you can boost the gain of the LFE
channel.
LFE Low Pass Filter
Mark to activate.
Mute
Press to mute the selected monitor.
Solo
Press to solo the selected monitor.
Pink Noise
Press to generate Pink Noise
in the selected monitor.