Tannoy ACTIVE STUDIO MONITORS - Manual (Page 45)

45
Technical Specifications - TS212 iDP
™
& TS112 iDP
™
Subwoofer & iDP
™
Remote
Technical Specifications TS212 iDP™ Subwoofer
System Active Subwoofer
Frequency Response 25Hz – 150Hz (+/- 3dB)
Max. SPL (@ 1m) 124dB (continuous)
Crossover Frequency Set in bass management (DSP Generated)
Drive units 2 x 300mm (12") Aluminium Cone
Cabinet Volume/LF Alignment 45 Litres/Infinite baffle
Dimensions (H x W x D) 520mm x 471mm x 497mm
(20
1 / 2
” x 18
5 / 8
” x 19
5 / 8
”)
Cabinet Construction MDF
Gray suede paint finish on top with silver insert
Black Fabric on sides
Black anodised aluminium back plate
Total weight 51kg (112.2lbs)
Electronic System
Mains Voltage
115 or 230Vac, 50 – 60Hz (switchable)
Power Consumption 45W @
1 / 8
Full Power (IEC 60065)
Amplifier 1500 W PWM amp
System Sample Rates:
Internal
96 kHz (except when slaved to digital input
or word clock input)
External 96, 88.2, 64, 48, 44.1 or 32 kHz
(optional 192kHz)
Digital Section (Slave only):
I/O connectors
2 x RJ45 proprietary TC LINK
Dynamic Range > 113 dB typ. (unweighted)
THD+N < -105 dB typ. @ 1 kHz, -3 dBFS
Cross-talk < -120 dB
A to D Conversion 24 bit (Dual bit delta sigma sampling at
4.1/5.6/6.1/6.1 MHz)
TS112 iDP™ Subwoofer & iDP™
Active Subwoofer
25Hz – 150Hz (+/- 3dB)
118dB (continuous)
Set in bass management (DSP Generated)
1 x 300mm (12") Aluminium Cone
22 Litres/Infinite baffle
384mm x 366mm x 398mm
(15
1 / 8
” x 14
3 / 8
” x 15
5 / 8
”)
MDF
Gray suede paint finish.
Black anodised aluminium back plate.
25kg (55lbs)
115 or 230Vac, 50 – 60Hz (switchable)
45W @
1 / 8
Full Power (IEC 60065)
750 W PWM amp
96 kHz (except when slaved to digital input
or word clock Input)
96, 88.2, 64, 48, 44.1 or 32 kHz
(optional 192kHz)
2 x RJ45 proprietary TC LINK
> 113 dB typ. (unweighted)
< -105 dB typ. @ 1 kHz, -3 dBFS
< -120 dB
24 bit (Dual bit delta sigma sampling at
4.1/5.6/6.1/6.1 MHz)