Controlling the main camera, Selecting video sources, Moving / zooming camera – TANDBERG D12817-05 User Manual
Page 28: Focusing camera
28
TANDBERG Videoconferencing System
General use
Selecting video sources
Press:
to select the video source to be transmitted to the far end.
‘Main cam’ will activate the main camera.
‘Aux’, ‘doc cam’ and ‘vcr’ will activate the auxiliary video input.
‘Pc’ will activate PC Presenter (VNC).
doc cam
main cam
vcr
pc
aux
OK
zoom
Controlling the Main Camera
Moving / zooming camera
To control the Main Camera use the keys below:
for pan/tilt and
for zooming.
I
F
THE
MENU
SYSTEM
IS
ACTIVE
,
THE
ARROW
KEYS
WILL
NAVIGATE
IN
THE
MENUS
.
Focusing camera
The Main Camera is set to autofocus by default. If the Main Camera is moved (pan/tilt/zoom), autofocus will be
switched On automatically for 5 seconds.
W
HEN
SELECTING
THE
DOC
CAM
OR
PC
VIDEO
SOURCES
THE
SYSTEM
WILL
AUTOMATICALLY
REQUEST
FLOOR
WHEN
CONNECTED
TO
AN
EXTERNAL
MCU. T
HIS
FEATURE
CAN
BE
SWITCHED
OFF
IN
THE
U
TILITIES
MENU
.
NOTE