TANDBERG D12817-05 User Manual
Page 41
TANDBERG Videoconferencing System
41
Advanced use
MCU status line
On:
The MCU indicators will be displayed and provide information about the conference.
Off:
The MCU indicators will not be displayed.
Auto:
The MCU indicators will be displayed for a few seconds and then timed out. When grabbing the remote
control, the indicators will be shown again.
System Name
Identifies the system:
• during an MCU conference call.
• when using the Web-interface.
• when the codec is acting as an SNMP Agent.
• towards a DHCP server.
• as an H323 ID.
Menu Password
Enter the code whch should be entered to get access to the menus on the TANDBERG system. When pressing
the ‘Menu’ button on the remote control, the user will be asked to enter the Password written here.
Camera Brightness
To manually adjust the brightness select ‘Manual’ and use the arrow keys to adjust.
Welcome Menu
On:
A ‘Welcome menu’ with useful information on how to use the system will be displayed. See ‘Getting
started’ section.
Off:
The Welcome menu’ will not be displayed.
Logo:
If a logo is uploaded to the system, it will be shown when this button is selected.