Uniden BCT-10 - Manual (Page 20)

Selecting the Frequencies to Scan
Scanning All Frequencies
Note: The Alert feature is not active in this mode.
1. To scan all frequencies
(except Weather), press
the
S
key repeatedly or
press and hold the
S
key until “XX” is blinking on
the LED display.
2. All frequencies, except weather channels, are scanned for an
active transmission.
3. When the BCT-10 finds an
active frequency it
activates a buit-in two
second delay before it
resumes scanning.
Note: The
M
key does not operate in XX mode.
MUTE
HOLD
XX
MUTE
HOLD
XX
Operating Instructions
20