Uniden BCT-10 - Manual (Page 30)

Using HOLD to Stay on a Selected Frequency
When scanning stops on a desired frequency, you can lock onto
that frequency for as long as you like.
To monitor only one frequency:
1. When the scanner stops
on the desired frequency,
press the
H
key.
2. The LED display now
indicates the service,
either highway patrol or
local police, you are
monitoring. The scanner
remains on that frequency
until you cancel the Hold
mode by pressing
H
Note: While in the Hold mode, the Alarm feature is inactive!
3. To resume scanning and reactivate the Alert feature, press the
H
key.
HOLD
L/0 STATE
MUTE
MODE ALARM
SYSTEM
MUTE
HOLD
LP
HP
MUTE
HOLD
Operating Instructions
30