Uniden BCT-10 - Manual (Page 25)

Muting the Highway Patrol Alarm
While in the highway patrol mode you can turn off the alarm tone
during the time you are listening to a frequency or disable the
alarm tone permanently. To disable the alarm tone while listening
to a frequency:
1. While in the highway patrol
mode and after you receive
an alarm tone, press the
m
key.
2. The MUTE LED flashes.
Note: Only the alarm tone will be disabled. You will still receive
highway patrol alarms but only the ALARM LED will
come on.
3.
To enable the Alert Tone again, press the
m
key again.
Note: When the ALARM LED goes off, the mute mode will no
longer be on.
HOLD
L/0 STATE
MUTE
MODE ALARM
HIGHWAY
SYSTEM
HP
MUTE
HOLD
Operating Instructions
25