Uniden BCT-10 - Manual (Page 27)

Monitoring Weather Frequencies
1. To monitor weather
frequencies, press the
M
key
repeatedly until WX is
blinking on the LED display.
2. While scanning, the BCT-10
will display WX. When the
BCT-10 detects an active
frequency, it displays the
weather channel in the LED
and stops scanning.
3.
Press the
L
key to make
the BCT-10 scan for the next
weather frequency.
HOLD
L/0 STATE
MUTE
MODE ALARM
HIGHWAY
SYSTEM
WX
MUTE
HOLD
MUTE
HOLD
WX
MUTE
HOLD
W2
HOLD
L/0 STATE
MUTE
MODE ALARM
SYSTEM
Operating Instructions
27