Uniden BCT-10 - Manual (Page 22)

Scanning All Police Frequencies
1. To scan highway patrol and
local police frequencies,
press the
M
key
repeatedly until LP is
blinking on the LED display.
2. The LP and HP LED’s will
light up.
3. While scanning, the
BCT-10 displays the state
code for the state you
selected. When the BCT-10
detects an active
frequency, it displays LP
when monitoring an active
local police frequency and
HP when monitoring an
active highway patrol
frequency. The BCT-10 will
stop for two seconds, and
then resume scanning with
the state code displayed
on the LED.
HOLD
L/0 STATE
MUTE
MODE ALARM
HIGHWAY
SYSTEM
LP
MUTE
HOLD
LP
MUTE
HOLD
MUTE
HOLD
LP
MUTE
HOLD
TX
HP
MUTE
HOLD
Operating Instructions
22