Ultratec 200 - Manual (Page 36)

34 ■ SETTING UP THE CAPTEL FOR 2-LINE USE
S
ETTING
U
P
T
HE
C
AP
T
EL FOR
2-L
INE
U
SE
NOTE: You must follow this procedure to turn on 2-Line CapTel
service. Simply plugging a second line into the CapTel phone will
not activate 2-Line capabilities.
There are two steps to setting up
your CapTel. First, set it up in
standard mode. Then, activate the
2-Line menu.
Setup phone for 2-Line
1. Plug the AC adapter cord into the
round power jack on the bottom of
the CapTel.
2. Plug the first telephone line cord
into the jack marked with the wall-jack
icon on the bottom of the CapTel
(illustrated as Line #1).
NOTE: This phone line #1 should
be the primary telephone number
of your home/office, the phone
number you would give to people
to call you.
3. Plug the second telephone line cord into the other telephone jack
(no symbol) on the bottom of the CapTel.
4. Plug the telephone line cords into the appropriate wall jacks and
the AC adapter into an electrical outlet.
Bottom view of CapTel phone