Ultratec 200 - Manual (Page 37)

SETTING UP THE CAPTEL FOR 2-LINE USE ■ 35
Activate 2-Line Menu
1. With the handset hung up, press
the
key repeatedly until
you see
2Line Mode?. Press the
button next to On to turn 2-Line
capabilities on. Press
Exit to
leave the menu.
NOTE: If 2Line Mode? does not appear in your CapTel menu, contact
CapTel Customer Service.
2. Attach the desktop/wall footplate, making sure the larger side is along
the top edge of the CapTel. (For wall mount installation, see page 7.)
NOTE: If you are in an office setting, and your 1st line requires a number
to reach an outside line (such as “9”), you will need to manually dial a
dialing prefix before placing your call. If your 2nd line also requires a
dialing prefix to get an outside line, make sure you’ve entered one in
the CapTel menu as well. See page 20 for details.
You are now ready to begin making and receiving calls using the
2-Line capabilities.
If you have already used your CapTel phone in 1-Line Mode, be sure to
remove any Call-Waiting blocks previously set in the CapTel menu.
P
LACING A
C
ALL
W
ITH
C
APTIONS
(2-L
INE
M
ODE
)
1. Verify that the Caption feature is
On. The red light over the
button should be lit. If the light is not on, turn on the feature by
pressing the
button.
2. Pick up the handset and dial the phone number of the person you
want to call.
3. You may begin speaking to the person as soon as you hear them
answer, or when you see captions on the CapTel display.
CAPTION
CAPTION
MENU