Ultratec 200 - Manual (Page 8)

6 ■ INSTALLATION
I
NSTALLING
C
AP
T
EL
CapTel includes the following parts:
✔
Handset with coiled cord
✔
AC adapter
✔
7-foot telephone line cord
✔
6-inch telephone line cord (use when mounting on wall)
✔
Desktop/wall footplate
STEP 1 – Select a Location
The CapTel requires a standard (analog) telephone line like those in most
homes. If you are installing the CapTel in an office setting, check with
the telephone system administrator to make sure you are using an analog
port such as is used by some computer modems, some fax machines, or a
direct-connect text telephone (TTY).
Setup the CapTel in a place where:
✔
There is an electrical outlet nearby.
✔
There is a phone jack nearby.
✔
The surface it is set on, or mounted to, is stable and secure.
✔
The area is protected from excessive heat or humidity.
CAUTION! Do not plug the CapTel into any telephone line
other than a standard, analog telephone line or an analog port.
Connection to a digital telephone line may damage the CapTel
or the telephone system and will void your warranty. You may
connect to a Digital Subscriber Line (DSL) only if there is an
inline analog filter between the phone jack and the CapTel.