Unibrain 780 - Manual (Page 65)

Unibrain Fire-i 580/780/785/980 Operation Manual Page 59
Bit 7 ~ Bit 11 : reserved
Bit 12 ~ Bit 15 : run LUT index
Bit 16 ~ Bit 31 : reserved
0xF2F10140
LUT save control register
Bit 0 : save command
Bit 1 : save ready status( read only)
Bit 2 ~ Bit 6 : reserved
Bit 7 : set LUT write buffer address to 0
Bit 8 ~ Bit 11 : save LUT index
Bit 12 ~ Bit 31 : reserved
Read/Write
0xF2F10144
LUT data register (block write command)
Save the first data at low word, then second data at high word
Bit 0 ~ Bit 3 : reserved
Bit 4 ~ Bit 15 : the second data
Bit 16 ~ Bit 19 : reserved
Bit 20 ~ Bit 31 : the first data
Write Only
0xF2F10160
User defined AE X-axis value
Bit 0 : presence inquiry (read only)
Bit 1 ~ Bit4 : reserved
Bit 5 : Make Command
Bit 6 : On/Off (1: current setting value, 0: current image size)
Bit 7 : reserved
Bit 8 ~ Bit 19 : DAC or AE X-axis start position at current display image
(AE_SX)
Bit 20 ~ Bit 31 : DAC or AE X-axis width at current display image
(AE_WX >= 4)
Read/Write
0xF2F10164
User defined AE Y-axis value
Bit 0 : presence inquiry (read only)
Bit 1 ~ Bit 4 : reserved
Bit 5 : Make Command
Bit 6 : On/Off (1: current setting value, 0: current image size)
Bit 7 : reserved
Bit 8 ~ Bit 19 : DAC or AE Y-axis start position at current display image
(AE_SY)
Bit 20 ~ Bit 31 : DAC or AE Y-axis width at current display image
(AE_WY >= 4)
Read/Write
0xF2F10150
Snow noise remove threshold register
Bit 0 : presence inquiry (read only)
Bit 1 ~ Bit 5 : reserved
Bit 6 : on/off
Bit 7 : grid noise filter enable mode f or mono800 at color camera (0:disable, 1:
enable)
Bit 8~Bit23 : reserved
Bit 24~Bit31 : Threshold Value (T) :
If Pixel difference value > Threshold Value, the pixel is replaced with near pixel
average value
Read/Write
Threshold Value (T) 0
0 7 8 11
(MSB) (LSB)
Pixel compared threshold value bit map