Uniden CXAI 5198 - Manual (Page 23)

B A S I C S [ 2 2 ] w w w . u n i d e n . c o m
Call Waiting
If you have Call Waiting service, you can receive calls
while on the line.
1) If a call comes in while you are on the phone, you will
hear a call waiting tone. If you have CIDCW activated,
you will see the name and number of the incoming
caller.
2) Press talk/flash on the handset, or flash on the base
to accept the waiting call. After a short pause, you will hear the new caller.
3) To return to the original caller, press talk/flash on the handset, or flash on the base
again.
You must subscribe through your local telephone company to receive Call Waiting service.
Placing a Call on Hold
1) During a call with the base, press hold on the base. The call will be put on hold.
2) To return to the call, press hold again, pick up the corded handset or press
talk/flash on the handset. To talk to the caller on a speakerphone, press
(speaker) or hold on the base.
•You can place a call on
hold for ten minutes.
When ten minutes has
passed, the call is
disconnected, and the
phone returns to
standby mode.
•You can return the
corded handset to the
base while a call is on
hold, and the call will
remain on hold.
note
BA
SI
C
S