Uniden CXAI 5198 - Manual (Page 26)

[ 2 5 ] B A S I C S w w w . u n i d e n . c o m
Mute Base Microphone
During a call or an intercom call, press mute on the base
to mute the microphone.
M u te On appears on the display.
To cancel muting, press mute again.
Tone Dialing Switch-over
If your telephone company requires pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as telephone bank tellers,
telephone prescription refills, customer support menus, etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press
* /tone/ . Any
digits you enter from then on will be sent as tone digits.
When this particular call ends, the phone automatically
returns to pulse dialing mode.
Traveling Out of Range
During a call, as you begin to move your handset too far from your base unit, noise
may increase. If you pass the range limits of the base unit, your call will terminate
within one minute.
5 2  2 J Q P G       
    / W V G  1 P
The tone feature only
applies when the dial
mode is set to pulse.
note
BA
SI
C
S