Uniden CXAI 5198 - Manual (Page 31)

U S I N G T H E S P E E D D I A L M E M O R Y [ 3 0 ] w w w . u n i d e n . c o m
If the selected speed dial number is already assigned, the
Edit screen appears. You can select
E d it to edit this
entry, select De le t e to erase this entry, or select G o B a ck
to choose another speed dial number.
4) Enter a name according to the instructions below.
• The name can be up to 14 characters.
• Use #/
and * /tone/ keys to move the cursor to the desired location.
• Use delete/channel ( delete on the base) to delete characters as needed.
• Press and hold delete/channel ( delete on the base) to delete all the characters.
• If no name is required, go to step 5.
Refer to the letters on the number keys to select the desired characters.
Each time you press a numeric key, the displayed character appears in the following
order: Upper case letters first, lower case letters next and finally the number
corresponding to the key.
If you make a mistake while entering a name
Use
* /tone/ or #/ to move the cursor to the incorrect character.
Press delete/channel ( delete on the base) to erase the wrong character. Then enter
the correct character. To delete all characters, press and hold delete/channel
( delete on the base) .
If the next character
uses the same number
key, you must press the
#/
key to move the
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
note
USIN
G THE S
P
EED
DI
AL MEMOR
Y