Uniden CXAI 5198 - Manual (Page 48)

[ 4 7 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E w w w . u n i d e n . c o m
Recording a conversation
You can record a conversation from the handset or the base (more than two seconds
and less than ten minutes).
1) During a conversation, press rec/remote/call screen on the handset or press and
hold memo/call rec on the base.
2) Re c or d in g a C al l appears on the display. A confirmation tone that can be heard by
both parties sounds during recording.
3) To stop recording, press rec/remote/call screen on the handset, or memo/call rec
or (play/stop) on the base.
Screening a call
From the base
To screen an incoming call, use the following steps:
1) After the answering system answers, the base speaker will let you hear the calls as
the machine records the message. To adjust the volume, press the volume up or
down key. If you turn the answering system off, you cannot screen a call.
2) To answer the call, pick up the corded handset or press (speaker) on the base.
To mute the Call Screen, press mute or (play/stop). To cancel muting, press /
/ /select/volume.
From the handset
Press rec/remote/call screen when the system is answering. To cancel the Call Screen,
press end or return the handset to the cradle. To answer the call, press talk/flash or
any number (when AutoTalk is set to on). The answering system will disconnect
automatically.
•If the recording
memory is full, you can
not record a
conversation until you
clear some messages
from the memory.
•Every state has
different regulations
governing the
recording of
conversations over the
telephone. Make sure
to check your local,
state and federal laws
before using this
product to record any
telephone
conversation in order
to determine that your
use is in compliance
with such laws or
guidelines.
•You can not record
intercom
conversations.
•To activate this
feature, you must turn
the Call Screen feature
on. See “Setting the
Call Screen“ on
page 39.
note
THE IN
TEGRA
TED
AN
SW
ERI
N
G DEVI
CE