Uniden DCT738 - Manual (Page 13)

2
Installing the Phone
Choosing the Best Location
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:.
The.location.should.be.close.to.both.a.phone.jack.and.a.power.outlet.that.is.not.controlled.by.a.wall.switch.
The.base.and.handset.should.be.kept.away.from.sources.of.electrical.noise.such.as.motors,.microwave.
ovens, and fluorescent lighting.
Don’t.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures..The.battery.may.not.charge.properly..
For.better.reception,.place.the.base.as.high.as.possible.
The.base.should.be.placed.in.an.open.area.for.optimum.range.and.reception.
If.your.home.has.specially.wired.alarm.equipment.connected.to.a.phone.line,.be.sure.that.installing.the.
system.does.not.disable.your.alarm.equipment..If.you.have.questions.about.what.will.disable.alarm.
equipment, contact your telephone company or a qualified installer.
Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.wall.plate.
Snap.the.wall.mount.adapter.into.the.notches.on.the.base.top.
Plug.the.AC.adapter.into.the.DC.IN.9V.jack.
CAUTION: To avoid risk of fire and shock, only use the Uniden
AD-800 AC adapter.
Wrap.the.AC.adapter.cord.inside.the.molded.wiring.channel.as.shown.
Plug.the.AC.adapter.into.a.standard.20V.AC.wall.outlet..DO.NOT.use.an.
AC.outlet.controlled.by.a.wall.switch.
•
•
•
•
•
•
.
2.
3.
4.